Introducing the new Wallgate range of single ended baths. Manufactured from 4mm white Acrylic, this bath offers plenty of space. Manufactured from sanitary grade Lucite acrylic and finished in white to match other sanitary-ware, this stunning bath is sure to create a centrepiece in your bathroom. Why not upgrade your Whirlpool bath to an Hydrotherapy bath? These are the ultimate in bathing luxury and have numerous benefits both mentally and physically.

Technical Specification

Bath

Length : 1800mm
Width : 800mm
Height : 355mm
Bath Internal Length: 1082mm
Bath Internal Width : 384mm
Outlet Connection Size : 52mm
Capacity : 147 Litres
Style : Modern
Material : High Quality Reinforced Acrylic
Supplied undrilled, allowing you to place the taps along the back or end
Finish : White

Whirlpool System

6 or 11 directional chrome low profile whirlpool jets
System operated via flush fit chrome pneumatic controls
Once operated the hydro massaging qualities can be tailored via the air control with a simple turn of the dial. Increasing the flow of air to the jets increases the feeling of lightness and therapeutic benefits.
The system is powered by a high flow, energy efficient and low noise 660W pump.
To ensure the system is probably the most hygienic on the market not only is the pump self-draining but the highest-grade pipework is used ensuring complete draining and lasting quality.
Covered with a full and comprehensive on site 5-year guarantee.
All systems designed, developed and fitted in the UK.

Hydrotherapy System

11 directional low-profile whirlpool jets & 12 Air Spa jets both in a chrome finish
System operated via flush fit chrome pneumatic controls
Once operated the hydro massaging qualities can be tailored via the air control with a simple turn of the dial. Increasing the flow of air to the jets increases the feeling of lightness and therapeutic benefits.
Air is pumped into the bath from underneath the bath through discreet, low profile, chrome nozzles located on the base surface of the bath.
To create a relaxing and massaging effect the Air spa system efficiently pumps air into your bath via small, fine bubbles and so aerates the water, increasing the level of oxygen.
To reduce the heat loss of the bath water temperature the air is pre-heated within the motor prior to being pumped into the bath.
The position of each of the Air Spa nozzles are always on the bottom surface of the bath and not on the side or backrest section of the internal bath surface, this is because the bubbles emitted from the nozzles are designed to travel in a direct, vertical direction upward.
To ensure the system is probably the most hygienic on the market not only is the pump self-draining but the highest-grade pipework is used ensuring complete draining and lasting quality.
All systems designed, developed and fitted in the UK.

NB: All measurements are approximate. In line with manufacturing policy we reserve the right to amend specification without prior notice.